Big Discount Self-Aligning Bearing - BK2520 Drawn cup needle roller bearings – CWL
Big Discount Self-Aligning Bearing - BK2520 Drawn cup needle roller bearings – CWL Detail:
The drawn cup of hardened steel and the needle roller and cage assembly of these bearings form a nonseparable unit.
The outer ring of drawn cup needle roller bearing is punched with the high-quality steel sheet. The outer ring has thin wall.
The drawn cup needle roller bearing has the characteristics of small radial section area, large load carrying capacity, less inertia and economic manufacture. It is suitable for small section height, or when the housing bore isn’t used for raceway, this type is recommended to use. The bearing is assembled into the housing bore under a certain pressure without further axial location.
The drawn cup needle roller bearing generally takes its shaft diameter as the internal raceway.
The drawn cup needle roller bearing has two structures-with retainer and with full of needles. They are divided into opened type and close-end type. The structure with retainer has the single seal ring and double seal ring. The structure with full of needles has a large load carrying capacity.
Features of Drawn cup needle roller bearings
Low cross section.
In applications where less space is available, drawn cup needle roller bearings enable downsizing.
High load carrying capacity and stiffness.
Owing to their large number of rollers, drawn cup needle roller bearings have a high load carrying capacity and stiffness.
Good running properties.
BK2520 detail Specifications
Main Dimensions
Diameter under rollers(Fw):25mm
Outer diameter(D):32mm
Width(C): 20mm
Tolerance of Width:-0.3mm to 0mm
Chamfer dimension drawn cup (outer ring)(r min.) :0.8mm
Dynamic load ratings(Cr): 18.91KN
Static load ratings(Cor):31.35KN
Product detail pictures:
Related Product Guide:
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Big Discount Self-Aligning Bearing - BK2520 Drawn cup needle roller bearings – CWL , The product will supply to all over the world, such as: Moldova, Kenya, Mexico, We set "be a creditable practitioner to achieve the continuous development and innovation" as our motto. We would like to share our experience with friends at home and abroad, as a way to create a bigger cake with our joint efforts. We have several experienced R & D persons and we welcome OEM orders.
By Carlos from USA - 2017.09.09 10:18
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Cora from Netherlands - 2017.06.22 12:49
