factory low price Bearing With Rubber - UCF217 four Bolt Square flange bearing units with 25mm bore – CWL
factory low price Bearing With Rubber - UCF217 four Bolt Square flange bearing units with 25mm bore – CWL Detail:
The Features of UCF217 four Bolt Square flange bearing units
1.consisting of a ball bearing insert UC 217 and a cast iron housing F 217
2.4-hole flange bearing design allows installation in a variety of applications and is suitable for very high radial loads
3.the housing is made of cast iron and therefore inexpensive and robust
4.the bearing insert has an extended inner ring with grub screws
5.The flange bearing is mounted on the shaft using two grub screws
6.Smooth running and good behavior with tilting due to the extended inner ring
7.lubricated for life; under normal operating conditions relubrication is not required
housing with integrated lubrication hole
8.to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil
UCF217 Square flange bearing units detail Specifications
Main Dimensions
Shaft Diameter d: 85mm
Overall length(a): 220mm
Distance between attachment bolts(e): 175mm
i: 36mm
Flange width(g):24mm
L:63mm
Diameter of attachment bolt hole(s):23mm
Overall unit width(z):87.6mm
Width of inner ring(B):85.7mm
n:34.1mm
Bolt Size:M20
Dynamic Load Rating: 21.2KN
Static Load Rating: 10.9KN
MOUNTING INFORMATION
Set screwG2:M12x1.5
Hexagonal key size for set screw :6.08 mm
Recommended tightening torque for set screw :28.5 Nm
Recommended diameter for attachment bolts, mm G 20 mm
Recommended diameter for attachment bolts, inch G 0.75 in
Product detail pictures:
Related Product Guide:
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for factory low price Bearing With Rubber - UCF217 four Bolt Square flange bearing units with 25mm bore – CWL , The product will supply to all over the world, such as: Jakarta, South Africa, Cyprus, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Matthew Tobias from Namibia - 2018.06.30 17:29
Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
By Agustin from Australia - 2018.12.11 14:13
