Factory made hot-sale Excavator Bearing - N307-E single row Cylindrical roller bearing – CWL
Factory made hot-sale Excavator Bearing - N307-E single row Cylindrical roller bearing – CWL Detail:
Single-row cylindrical roller bearings with a cage comprising cylindrical rollers caged between a solid outer and inner ring. These bearings have a high level of rigidity, can support heavy radial loads and are suitable for high speeds. The inner and outer rings can be fitted separately, making installation and removal a simple process.
The outer ring of an N series cylindrical bearing has no ribs, whereas the inner ring of the cylindrical bearing has two fixed ribs. This means that the N series cylindrical bearing cannot locate the shaft, therefore the axial displacement of the shaft relative to the casing can be accommodated in both directions.
Pressed steel or machined brass cages are generally used, but sometimes molded polyamide cages are also used.
The N307-E single row Cylindrical roller bearing , “E” suffix designates higher radial load capacity .
N307-E single row Cylindrical roller bearing detail Specifications
Main Dimensions
Bore diameter(d):35mm
Outer diameter( D): 80mm
Withd(B): 21mm
Chamfer dimension(r min.):1.5mm
Chamfer dimension(r1 min.):1.1mm
Permissible axial displacement(S max.):1.2MM
Raceway diameter of outer ring(E):70.2mm
Static load ratings(Cor):56.7KN
Dynamic load ratings(Cr): 68.4KN
ABUTMENT DIMENSIONS
Diameter of spacer sleeve(da min.):43 mm
Diameter of spacer sleeve(da max.):68 mm
Diameter of housing abutment(Da min.):72 mm
Diameter of housing abutment (Da max.):73.4 mm
Radius of fillet(ra max.):1.5 mm
Radius of fillet(rb max.):1 mm
Product detail pictures:
Related Product Guide:
We believe that long expression partnership is often a result of top of the range, value added service, prosperous encounter and personal contact for Factory made hot-sale Excavator Bearing - N307-E single row Cylindrical roller bearing – CWL , The product will supply to all over the world, such as: Philadelphia, Porto, Denver, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By David from Luxembourg - 2017.12.19 11:10
We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
By Michelle from Nepal - 2017.02.14 13:19
