Factory source Bearing Hub For Cycle - KMTA 15 Precision lock nuts with locking pin – CWL
Factory source Bearing Hub For Cycle - KMTA 15 Precision lock nuts with locking pin – CWL Detail:
Precision lock nuts with locking pins,KMT and KMTA lock nuts are intended for applications where high precision, simple assembly and reliable locking are required. The three, equally-spaced locking pins enable these lock nuts to be accurately positioned at right angles to the shaft. However, they can also be adjusted to compensate for slight angular deviations of adjacent components.
KMT and KMTA lock nuts should not be used on shafts with keyways in the thread or adapter sleeves. Damage to the locking pins can result if they align with either.
KMTA lock nuts are available for thread M 25×1,5 to M 200×3 (sizes 5 to 40)have a cylindrical outside surface and, for some sizes, a different thread pitch than KMT lock nuts are intended primarily for applications where space is limited and the cylindrical outside surface can be used as an element of a gap-type seal
KMT and KMTA series precision lock nuts have three locking pins equally spaced around their circumference that can be tightened with set screws to lock the nut onto the shaft. The end face of each pin is machined to match the shaft thread. The locking screws, when tightened to the recommended torque, provide sufficient friction between the ends of the pins and the unloaded thread flanks to prevent the nut from loosening under normal operating conditions .
KMTA 15 Precision lock nuts with locking pin detail Specifications
Main Dimensions
Thread (G):M75X1.5
Outer diameter(d2):100mm
Outer diameter locating side face(d3):91mm
Inner diameter locating side face(d4):77mm
Width(B):26mm
Pitch diameter for pin-type face spanner(J1):88mm
Distance between holes for pin-wrench and locating side face(J2):13mm
Diameter holes for pin-type face spanner(N1):6.4mm
Set / Locking screw size:M8
Product detail pictures:
Related Product Guide:
With reliable good quality system, great standing and perfect consumer support, the series of products and solutions produced by our organization are exported to quite a few countries and regions for Factory source Bearing Hub For Cycle - KMTA 15 Precision lock nuts with locking pin – CWL , The product will supply to all over the world, such as: Macedonia, Philadelphia, Germany, What is good price? We provide customers with factory price. In the premise of good quality, efficiency must be paid attention to and maintain appropriate low and healthy profits. What is a fast delivery? We make the delivery according to customers' requirements. Although delivery time depends on the order quantity and the complexity of it, we still try to supply products in time. Sincerely hope we could have long term business relationship.
By Andrew from Victoria - 2018.09.21 11:01
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Grace from Tajikistan - 2018.12.28 15:18
