page_banner

Products

GE 180 ES 2RS Radial spherical plain bearings with 180 mm bore

Short Description:

Radial spherical plain bearings have an inner ring with a sphered convex outside diameter and an outer ring with a correspondingly sphered but concave inside surface. Their design makes them particularly suitable for bearing arrangements where alignment movements between shaft and housing have to be accommodated, or where oscillating or recurrent tilting or slewing movements must be possible at relatively slow sliding speeds, often accompanied with heavy loads.

The bearings require maintenance and can be relubricated via lubrication holes and an annular groove in both rings.


Product Detail

Product Tags

GE 180 ES 2RS  Radial spherical plain bearings detail Specifications:

Material : 52100 Chrome Steel

S: Annular groove and two lubrication holes in the inner and outer rings

Seal Type  : 2RS

Weight : 18 kg

 

Main Dimensions:

Bore diameter (d) : 180 mm

Outer diameter (D) : 260 mm

Width (B) : 105 mm

Width outer ring (C) : 80 mm

Raceway diameter inner ring (dk) : 225 mm

Chamfer dimension bore(r1 min.) : 1.1 mm

Chamfer dimension outer ring (r2 min.) : 1.1 mm

Angle of tilt : α = 6°

Dynamic load ratings (Cr) : 1500.00 KN

Static load ratings (Cor) : 7600.00 KN

 

ABUTMENT DIMENSIONS

Abutment diameter shaft (da min.) : 191 mm

Abutment diameter shaft (da max.): 199 mm

Abutment diameter housing (Da min.): 214 mm

Abutment diameter housing (Da max.): 250.5 mm

Fillet radius shaft (ra max.) : 1.0 mm

Fillet radius housing(rb)max. : 1.0 mm

GE...ES 2RS

  • Previous:
  • Next:

  • Write your message here and send it to us