Good quality Machinery Bearing - QJ224 Four point Angular Contact Ball Bearing – CWL
Good quality Machinery Bearing - QJ224 Four point Angular Contact Ball Bearing – CWL Detail:
Dimensions and Tolerances
Four point contact ball bearings with normal tolerance in accordance to DIN 620-2 (Tolerances for roller bearings) and ISO 492 (Radial bearings – Dimensional and geometrical tolerances).
Standards
The general dimensions of four point contact ball bearings are standardised by DIN 628-4 (Rolling bearings – Angular contact radial ball bearings – Four point contact bearing) for type QJ and based on the standard of TGL2982 for type Q. Dimensions and tolerances of the holding grooves are standardised by ISO 20515 (Radial bearings – holding grooves).
QJ224 detail Specifications
Main Dimensions
Bore diameter (d):120mm
Bore diameter Tolerance:-0.015mm to 0
Outer diameter (D): 215mm
Outer diameter Tolerance:-0.02mm to 0
Width (B): 40mm
Width Tolerance:-0.05mm to 0
Chamfer Dimension( r) min.:2.1mm
ABUTMENT DIMENSIONS
Abutment diameter shaft(da) min. :132mm
Abutment diameter housing(Da) Max. :203mm
Fillet radius(ras) Max.:2mm
Load center(a):96.5mm
Fatigue load limit(Cu):17.7KN
Dynamic load ratings(Cr): 286KN
Static load ratings(Cor): 340KN
Product detail pictures:
Related Product Guide:
We provide fantastic energy in top quality and advancement,merchandising,gross sales and marketing and operation for Good quality Machinery Bearing - QJ224 Four point Angular Contact Ball Bearing – CWL , The product will supply to all over the world, such as: Croatia, Vietnam, Serbia, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.
By Mabel from Canada - 2018.06.28 19:27
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Carlos from Amsterdam - 2018.06.03 10:17
