Products

SN508 plummer block are made of Grey cast iron,it working with 22208CKBearing,1208K Bearing and 2208K bearing This kind of plummer block is easy installation, SN508 plummer block housing are robust,ready-to-mount unit that are assembled,lubricated and sealed ,with their simple and safe installation,easy alignment and reliable locking technology,they are an excellent alternative to sleeve-mounted bearing in housings

SN508 plummer block enable the bearings to achieve maximum bearing service life with less need for maintenance .

Applications of SN508 plummer block housing
General industry: Conveyors,Roller tables,Fans and blowers
Processing industry: Crushers,hammer mills,ball and rod mills,decanters,kilns
Paper making equipment:dryer cans,jack ladders,chip conveyers,pumps,pulpers
breast rolls,press rolls

Loadability of the Housings
SN Plummer Block Housings are designed for loads applied vertically to the bridging surface. In these instances the permissible load is determined by the load rating of fitted bearing. Should loads be applied at other angles, checks should be carried out to determine whether they are still valid for the housing, the housing connecting bolts and the mounting bolts.
housings from material GGG 40 & GS 45.Bolts to strength class 8.8 are supplied as standard for joining the housing upper and lower parts.
It is to be ensured that, when loading the housings, the connecting bolts and holding down bolts are tightened correctly.

SN508  detail Specifications

Main Dimensions
Shaft Dia di: 35mm(1-1/4 inch)
D(H8): 80mm
a: 205mm
b: 60mm
c:25mm
g(H12):33mm
Shaft Center Height (h)(h12):60mm
L:85mm
L1:90mm
W:110mm
n:30mm
Mount Hole Center To Center(m):170mm
S:M12
u:15mm
V:20mm
X:26mm
d2(H12):36.5mm
d3(H12):48mm
fi(H13): 4mm
f2:5.4mm