Products

Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly. The bearings are separable so that mounting is simple as the washers and the ball and cage assembly can be mounted separately

Single direction thrust ball bearings, as their name suggests, can accommodate axial loads in one direction and thus locate a shaft axially in one direction. They must not be subjected to any radial load.

The Features of Thrust ball bearings

Separable and interchangeable.
These bearings have a separable design to facilitate easy mounting, dismounting and bearing inspection. This also means that they are easily interchangeable.
Initial misalignment.
Bearings with sphered housing washer can accommodate initial misalignment.
Interference fit.
Shaft washers have a ground bore to enable an interference fit. The bore of the housing washer is turned and always larger than the shaft washer bore.
The balls which are used as rolling elements in thrust ball bearings enable outstanding performance at the highest speeds.

51200 detail Specifications

Material:52100 Chrome Steel
Metric Series
Construction:Grooved raceways,Single direction
Limiting Speed:11000 rpm
Weight:0.03kg

Main Dimensions
Bore diameter(d):10mm
Outer diameter(D):26mm
Height(T): 11mm
Inner diameter housing washer(D1):12mm
Outside diameter shaft washer(d1):26mm
Chamfer dimension washer(r) min.:0.6mm
Dynamic load ratings(Ca): 12.7KN
Static load ratings(Coa): 17KN

ABUTMENT DIMENSIONS
Abutment diameter shaft(da)min.:20 mm
Abutment diameter housing(Da)max.:16 mm
Fillet radius(ra)max.0.6 mm