Products

Depending on their series and size, cylindrical roller thrust bearings are fitted with A Glass fibre reinforced PA66 cage (suffix TN) or a machined brass cage (suffix M).
The main components of cylindrical roller thrust bearing:the cylindrical roller, cage thrust assemblies, the shaft washers,and the housing washers.

eparable design:Shaft washer (WS), housing washer (GS), cylindrical roller and cage thrust assembly (K) can be mounted separately.

Extended bearing service life:To prevent stress peaks, the roller ends are relieved slightly to modify the line contact between the raceway and rollers.

The cylindrical roller thrust bearings are simple in form and design. The bearings are produced in single row and double row designs,81206 TN Cylindrical roller thrust bearing is a single row bearing.

81206 TN Cylindrical roller thrust bearing detail Specifications

Main Dimensions
Bore diameter (d):30mm
Bore diameter Tolerance:-0.01mm to 0
Outer diameter :52mm
Outer diameter Tolerance(D):-0.019mm to 0
Width : 16mm
Width Tolerance:-0.25mm to 0
Chamfer Dimension( r) min.:0.6mm
Outer diameter shaft washer(d1):52mm
Bore diameter housing washer(D1):32mm
Height shaft washer(B):4.25mm
Dw:7.5mm
Static load ratings(Cor):141KN
Dynamic load ratings(Cr): 64KN
ABUTMENT DIMENSIONS
Abutment diameter shaft(da)min.:50 mm
Abutment diameter housing(Da)max.:31 mm
Fillet radius(ra)max.:0.6 mm

INCLUDED PRODUCTS
Roller and cage thrust assembly : K 81206 TN
Shaft washer:WS81206
Housing washer:GS 81206
TOLERANCES AND CLEARANCES:
Bearing data