Products

Features and benefits

Stiff housing:
Housing bases are reinforced with ribs.
Extra material surrounding the attachment bolt holes means that attachment bolts can be preloaded without deforming the housing base or bore.
Cap and base individually marked : enabling the correct tolerance for the bearing seat.

Dimples to locate accessories:
Potential positions of grease fittings or condition monitoring sensors are marked by dimples, advantageous for easy and efficient upgrades.

Simple mounting :
Cast lines in the housing base indicate the centre of the bearing seat, important for exact alignment.
Dimples indicate the positions of dowel pins, which can relieve the attachment bolts from shear forces.
Mounting instructions supplied with each seal pack provide information for efficient and correct assembly.

SNL320 detail Specifications

Main Dimensions
Shaft Dia da: 100mm
Shaft Dia db: 115mm
Centre height of bearing seat(h): 140mm
Overall length(a): 410mm
Distance between attachment bolts(e): 350mm
Foot width(b):120mm
Width of attachment bolt hole(u):26mm
Length of attachment bolt hole(v):32mm
Foot height(c):45mm
Overall height(w):271mm
L:185mm
L2:199mm
d1:157.5mm
Diameter of seal groove(d2):167.5mm
j:11.5mm
Width of seal groove(F):6mm
Width of bearing seat(g):86mm
Diameter of bearing seat(D):215mm
S:M24

MOUNTING INFORMATION
Recommended diameter of attachment bolts G:24 mm
Recommended tightening torque for attachment bolts:665 Nm
Size of cap bolts:M20x120
Tightening torque for cap bolts:200 Nm
Size of eye bolt:M10