Products

The Features of UCFL205 Two Bolt Oval Flange bearing Units

1.consisting of a ball bearing insert UC 205 and a cast iron housing FL 205
2.the design as a 2-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads
3.the housing is made of cast iron and therefore inexpensive and robust
4.the bearing insert has an extended inner ring with grub screws
5.The flange bearing is mounted on the shaft using two grub screws
6.smooth running and good behavior with tilting due to the extended inner ring
7.static misalignments can be compensated up to an angle of 2°
8.two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
9.lubricated for life; under normal operating conditions relubrication is not required
housing with integrated lubrication hole
10.to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil

UCFL205 detail Specifications

Main Dimensions
Shaft Dia diameter:25mm
Overall height(a): 130mm
Distance between attachment bolts(e): 99mm
Diameter of attachment bolt hole(i):16mm
Flange width(g):13mm
l:27mm
Diameter of attachment bolt hole(S):16mm
Overall length(b):68mm
Overall unit width(Z):35.8mm
t:40mm
Width of inner ring(B):34.1mm
n:14.3mm
Bolt Size:M14
Dynamic Load Rating: 14KN
Static Load Rating: 7.8KN

MOUNTING INFORMATION
Set screw G2:M6x1
Hexagonal key size for set screw :3.05 mm
Recommended tightening torque for set screw :4 Nm
Recommended diameter for attachment bolts, mm G:14 mm
Recommended diameter for attachment bolts, inch G:0.563 in