Reasonable price for Submerged Pump Thrust Bearing - GE 17 ES Radial spherical plain bearings – CWL
Reasonable price for Submerged Pump Thrust Bearing - GE 17 ES Radial spherical plain bearings – CWL Detail:
The sliding contact surface of this bearing is treated with a running-in lubricant. This reduces friction and wear during the running-in period. To facilitate lubrication, all bearings, with the exception of some small sizes, have an annular groove and two lubrication holes in both the inner and outer rings.
Spherical plain bearings are appropriate for bearing arrangements where alignment movements between the shaft and housing have to be accommodated, or where oscillating or recurrent tilting must be allowed at comparatively slow sliding speeds.
Steel against steel.
Double rubber sealed.
Radial spherical plain bearings support radial forces and axial loads in both directions.
GE 17 ES Radial spherical plain bearings detail Specifications
Main Dimensions
Bore diameter (d):17mm
Bore diameter Tolerance:-0.008mm to 0
Outer diameter (D): 30mm
Outer diameter Tolerance:-0.009mm to 0
Width (B): 14mm
Width Tolerance:-0.12mm to 0
Width outer ring(C):10mm
Raceway diameter inner ring(dk):25mm
Chamfer dimension bore(r1 min.):0.3mm
Chamfer dimension outer ring(r2 min.):0.3mm
Angle of tilt:α =10 °
Dynamic load ratings(Cr): 21.2KN
Static load ratings(Cor): 106KN
ABUTMENT DIMENSIONS
Abutment diameter shaft(da min.):19 mm
Abutment diameter shaft(da max.):20.7 mm
Abutment diameter housing(Da min.):23.7 mm
Abutment diameter housing(Da max.):28.3 mm
Fillet radius shaft (ra max.):0.3 mm
Fillet radius housing(rb)max.0.3 mm
Product detail pictures:
Related Product Guide:
Our organization has been focusing on brand strategy. Customers' gratification is our greatest advertising. We also source OEM provider for Reasonable price for Submerged Pump Thrust Bearing - GE 17 ES Radial spherical plain bearings – CWL , The product will supply to all over the world, such as: Iran, Frankfurt, Latvia, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We've got tightened inspection for quality of product.
By Mildred from Marseille - 2018.09.29 17:23
Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
By Hedda from Greece - 2017.04.18 16:45
