Bottom price Mounted Bearings And Housings - GE 17 ES Radial spherical plain bearings – CWL
Bottom price Mounted Bearings And Housings - GE 17 ES Radial spherical plain bearings – CWL Detail:
The sliding contact surface of this bearing is treated with a running-in lubricant. This reduces friction and wear during the running-in period. To facilitate lubrication, all bearings, with the exception of some small sizes, have an annular groove and two lubrication holes in both the inner and outer rings.
Spherical plain bearings are appropriate for bearing arrangements where alignment movements between the shaft and housing have to be accommodated, or where oscillating or recurrent tilting must be allowed at comparatively slow sliding speeds.
Steel against steel.
Double rubber sealed.
Radial spherical plain bearings support radial forces and axial loads in both directions.
GE 17 ES Radial spherical plain bearings detail Specifications
Main Dimensions
Bore diameter (d):17mm
Bore diameter Tolerance:-0.008mm to 0
Outer diameter (D): 30mm
Outer diameter Tolerance:-0.009mm to 0
Width (B): 14mm
Width Tolerance:-0.12mm to 0
Width outer ring(C):10mm
Raceway diameter inner ring(dk):25mm
Chamfer dimension bore(r1 min.):0.3mm
Chamfer dimension outer ring(r2 min.):0.3mm
Angle of tilt:α =10 °
Dynamic load ratings(Cr): 21.2KN
Static load ratings(Cor): 106KN
ABUTMENT DIMENSIONS
Abutment diameter shaft(da min.):19 mm
Abutment diameter shaft(da max.):20.7 mm
Abutment diameter housing(Da min.):23.7 mm
Abutment diameter housing(Da max.):28.3 mm
Fillet radius shaft (ra max.):0.3 mm
Fillet radius housing(rb)max.0.3 mm
Product detail pictures:
Related Product Guide:
Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments for Bottom price Mounted Bearings And Housings - GE 17 ES Radial spherical plain bearings – CWL , The product will supply to all over the world, such as: Thailand, French, Tunisia, By integrating manufacturing with foreign trade sectors, we can offer total customer solutions by guaranteeing the delivery of right items to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified product portfolios and the control of the industry trend as well as our mature before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
By Gladys from Jamaica - 2018.07.27 12:26
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Marguerite from Barcelona - 2017.06.19 13:51
