High reputation Cam Rollers/Yoke-Type Track Rollers Based On Ball Bearings - KP000 ZINC ALLOY BEARING UNITS with 10mm bore – CWL
High reputation Cam Rollers/Yoke-Type Track Rollers Based On Ball Bearings - KP000 ZINC ALLOY BEARING UNITS with 10mm bore – CWL Detail:
KP000 bearing is Mini Zinc Plated Pillow Block with Set Screw Locking Ball Bearing in Unit, Both Sides Rubber Sealed and pre-Lubricated with Grease.
Ball bearing units consist of a precision wide inner ring bearing assembled into a housing made of cast iron or pressed steel. Units are pre-lubricated and are designed to slip fit on to the shaft. Locking method is either set screw locking, eccentric self-locking or concentric. On cast iron and pressed steel units, the outside diameter of the bearing and the inside diameter of the housing are sphered, allowing the bearing to swivel within the housing to accommodate initial alignment.
There are numerous bearing and housing combinations to accommodate a diversity of mounting surfaces, load requirements, shaft sizes and dimensional requirements.
KP000 ZINC ALLOY BEARING UNITS detail Specifications
Main Dimensions
Shaft Dia d:10mm
Height (h): 18mm
a: 67mm
e:53mm
b:16mm
s:7mm
g: 6mm
w: 35mm
Bi: 14mm
n: 4mm
Bolt size:M6
Basic dynamic load rating:12.7 KN
Basic static load rating :6.7 KN
Product detail pictures:
Related Product Guide:
Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for High reputation Cam Rollers/Yoke-Type Track Rollers Based On Ball Bearings - KP000 ZINC ALLOY BEARING UNITS with 10mm bore – CWL , The product will supply to all over the world, such as: Porto, Nigeria, Guatemala, Each product is carefully made, it will make you satisfied. Our merchandise in the production process have got strictly monitored, because it is only to supply you the best quality, we'll feel confident. High production costs but low prices for our long-term cooperation. You can have a variety choices and the value of all types are same reliable. If you have any question, do not hesitate to ask us.
By Giselle from Poland - 2018.09.21 11:44
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Eunice from South Korea - 2017.12.19 11:10
