Products

High-precision spindle bearings are used at the ends of a ball screw to determine a more accurate location and to withstand large axial loads.

Precision bearings are mainly used at high rotational speeds, for example in compressors and vacuum pumps, but high-precision bearings can also be found in the dentist’s drill. Similarly, they appear in the drive spindles of a machining centre to make an engine block, where precise and rapid movements are performed with precise tolerances.

7602040-TVP super-precision single direction Axial angular contact ball bearings with polyamide cage, guided by balls. Due to the contact angle of 60°, the bearings can support not only radial forces but high axial forces as well. These bearings are also particularly easy to fit.

For bearing 7602040-TVP,The suffixes TVP indicate that the cage (part of the bearing that keeps the balls at a distance from each other) is made of polymer material. In general made of fiberglass-reinforced polyamide.

Detail Specifications

Main Dimensions
Bore diameter (d):17mm
Bore diameter Tolerance:-0.004mm to 0
Outer diameter (D):40mm
Outer diameter Tolerance:-0.006mm to 0
Width (B): 12mm
Width Tolerance:-0.08mm to 0
Chamfer Dimension( r) min.:0.6mm
Distance between the apexes of the pressure cones(a) :31mm
Dynamic load ratings axial(Ca):17.2KN
Static load rating axial (C0a): 32.5KN
Axial runout :2 um

ABUTMENT DIMENSIONS
Abutment diameter shaft (da):23mm
Diameter shaft clearance (da):h12
Abutment diameter housing(Da):34.5mm
Diameter housing Clearance(Da):H12mm