Products

Deep Groove Ball Bearings are the most common bearing type found in a wide variety of applications. Deep groove ball bearings are including:self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies.
Versatile and robust they are available in a wide range of sizes and options including seals, shields and special clearance for high speed applications. The main types are:

Open – Bearing without seals or shields, suitable for applications where lubricant will constantly flow through them ,such as: gearboxes.
Metal Shields (ZZ or 2Z) – Bearings fitted with steel shields and lubricated .
Rubber Seals (2RS,) – Bearings fitted with steel reinforced rubber contact seals which provide a better seal but add friction so are unsuitable for high speed applications, lubricated
They are well used in the agricultural industry, garden equipment, manufacturing and more.

6201-1/2″ 2Z is Special 1/2 Inch Bore Size Ball Bearing that is found in many applications
The 6201-ZZ-1/2 ball bearing has two metal shields one on each side,Lubrication with grease.

They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.

6201-1/2″ 2Z detail Specifications

Main Dimensions
Bore diameter (d):1/2” (12.7mm)
Bore diameter Tolerance:-0.008mm to 0
Outer diameter (D): 32mm
Outer diameter Tolerance:-0.011mm to 0
Width (B): 10mm
Width Tolerance:-0.12mm to 0
Chamfer Dimension( r) min.:0.6mm
Dynamic load ratings(Cr): 6.18KN
Static load ratings(Cor): 3.06KN

ABUTMENT DIMENSIONS
Abutment diameter shaft (da)min.:16.2mm
Abutment diameter shaft (da)max.:18.4mm
Abutment diameter housing(Da).:max.27.8mm
Radius of shaft or housing fillet(ra)max.:0.6mm