Products

Take-up units are typically mounted in take-up frames and are connected by an adjustment screw.
The radial insert ball bearing and housing units Series is easy mounting, smooth running and high reliability and thus allow particularly economical bearing arrangements.

The dimensions of the housings, made from flake graphite cast iron and with a primer paint coating, conform to JIS B 1559.

These single piece cast housings can support moderate to high radial and axial loads. The radial insert ball bearings have basic protection against corrosion.

The bearing units are particularly suitable for applications with moderate to high loads.

UCT204   Take-up ball bearing unit  detail Specifications

Housing material: gray cast iron or ductile iron
Bearing Unit Type: Take-Up Type
Bearing Material:52100 Chrome Steel
Bearing type:ball bearing
Bearing No. : UC204
Housing No. : T204
Housing Weight:0.7 kg

Main Dimension
Shaft Diameter d:20mm
Length of attachment slot(O): 16mm
Length attachment end(g): 10mm
Height of attachment end(p):51mm
Height of attachment slot(q):32mm
Diameter of attachment bolt hole(S):19mm
Length of piloting groove(b):51mm
Width of piloting groove(k):12mm
Distance between bottoms of piloting grooves(e): 76mm
Overall height(a):89mm
Overall length(w):94mm
Overall width(j): 32mm
Width of flange in which piloting grooves are provided(l): 21mm
Distance from attachment end face to centre line of spherical seat diameter(h):61mm
t:44.5
Width of inner ring(Bi):31mm
n: 12.7mm
Basic dynamic load rating:12.7 KN
Basic static load rating :6.7 KN

MOUNTING INFORMATION
Set screwG2 : M6x1
Hexagonal key size for set screw :3.05 mm
Recommended tightening torque for set screw :4 Nm