China Original Factory Center Bearing - 30202 Tapered roller bearings, single row – CWL manufacturers and suppliers

Original Factory Center Bearing - 30202 Tapered roller bearings, single row – CWL

Short Description:

Product Detail

Product Tags

Feedback (2)

We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Machined Needle Roller Bearing, Micro Miniature Bearings, China Tapered Roller Bearings, Honesty is our principle, professional operation is our work, service is our goal, and customers' satisfaction is our future!

Original Factory Center Bearing - 30202 Tapered roller bearings, single row – CWL Detail:

The Features of Tapered roller bearings

1.Low friction
The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear.

2.Enhanced operational reliability
Optimized surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.

3.Consistency of roller profiles and sizes
The dimensional and geometrical tolerances for the tapered roller bearings is practically identical. This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately.

4.Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.

5.Separable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup).

30202 detail Specifications

30202 detail Specifications:
Material:52100 Chrome Steel
Construction:Single row
Metric series
Limiting speeds Oil: 15000rpm
Limiting speeds Grease: 11000rpm
Weight:0.055 kg

30202 Tapered roller bearing

Main Dimensions:
Bore diameter(d):15mm
Outer diameter(D): 35mm
Width of inner ring(B): 11mm
Width of outer ring(C): 10mm
Total width(T): 11.75
Chamfer dimension of inner ring(r )min.:0.6mm
Chamfer dimension of outer ring( r) min.:0.6mm
Dynamic load ratings(Cr):14.22KN
Static load ratings(Cor): 13.05KN

ABUTMENT DIMENSIONS
Diameter of shaft abutment(da)max.:20 mm
Diameter of shaft abutment(db) min.:20.5 mm
Diameter of housing abutment(Da)min.:30 mm
Diameter of housing abutment(Da)max.:30.5 mm
Diameter of housing abutment(Db)min.:32 mm
Minimum width of space required in housing on large side face(Ca)min.:2 mm
Minimum width of space required in housing on small side face(Cb)min.:2.5 mm
Radius of shaft fillet(ra)max.:0.6 mm
Radius of housing fillet(rb) max.:0.6 mm

Product detail pictures:

Related Product Guide:

As a way to provide you advantage and enlarge our organization, we even have inspectors in QC Crew and guarantee you our greatest assistance and product or service for Original Factory Center Bearing - 30202 Tapered roller bearings, single row – CWL , The product will supply to all over the world, such as: Italy, Kuwait, Miami, We have exported our products all over the world, especially the USA and European countries. Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures to ensure high quality.If you are interested in any of our products, please don't hesitate to contact us. We will try our best to meet your needs.

Aircon Pump Bearing