Original Factory Center Bearing - 30202 Tapered roller bearings, single row – CWL
Original Factory Center Bearing - 30202 Tapered roller bearings, single row – CWL Detail:
The Features of Tapered roller bearings
1.Low friction
The optimized roller end design and surface finish on the flange promote lubricant film formation, resulting in lower friction. This also reduces frictional heat and flange wear.
2.Enhanced operational reliability
Optimized surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
3.Consistency of roller profiles and sizes
The dimensional and geometrical tolerances for the tapered roller bearings is practically identical. This provides optimal load distribution, reduces noise and vibration, and enables preload to be set more accurately.
4.Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
5.Separable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup).
30202 detail Specifications
30202 detail Specifications:
Material:52100 Chrome Steel
Construction:Single row
Metric series
Limiting speeds Oil: 15000rpm
Limiting speeds Grease: 11000rpm
Weight:0.055 kg
Main Dimensions:
Bore diameter(d):15mm
Outer diameter(D): 35mm
Width of inner ring(B): 11mm
Width of outer ring(C): 10mm
Total width(T): 11.75
Chamfer dimension of inner ring(r )min.:0.6mm
Chamfer dimension of outer ring( r) min.:0.6mm
Dynamic load ratings(Cr):14.22KN
Static load ratings(Cor): 13.05KN
ABUTMENT DIMENSIONS
Diameter of shaft abutment(da)max.:20 mm
Diameter of shaft abutment(db) min.:20.5 mm
Diameter of housing abutment(Da)min.:30 mm
Diameter of housing abutment(Da)max.:30.5 mm
Diameter of housing abutment(Db)min.:32 mm
Minimum width of space required in housing on large side face(Ca)min.:2 mm
Minimum width of space required in housing on small side face(Cb)min.:2.5 mm
Radius of shaft fillet(ra)max.:0.6 mm
Radius of housing fillet(rb) max.:0.6 mm
Product detail pictures:
Related Product Guide:
With our excellent administration, potent technical capability and strict top quality control technique, we go on to provide our consumers with trusted quality, reasonable price ranges and fantastic providers. We intention at becoming one among your most trusted partners and earning your fulfillment for Original Factory Center Bearing - 30202 Tapered roller bearings, single row – CWL , The product will supply to all over the world, such as: Albania, Hyderabad, Iran, Thus far, our item associated with printer dtg a4 may be shown in most foreign nations as well as urban centers, which are sought after simply by targeted traffic. We all highly imagine that now we have the full capacity to present you with contented merchandise. Desire to collect requests of your stuff and produce the long-term co-operation partnership. We very seriously promise:Csame top quality, better price; exact same selling price, higher quality.
By Gwendolyn from Ukraine - 2018.12.25 12:43
Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.
By Teresa from Ottawa - 2018.12.22 12:52
