Products

Features of Needle roller thrust bearings

Accommodate heavy axial loads and peak loads.
The very small diameter deviation of the rollers within one assembly enables these bearings to accommodate heavy axial loads and peak loads.
Extended bearing service life.
To prevent stress peaks, the roller ends are relieved slightly to modify the line contact between the raceway and rollers.
AXK Series Needle roller and cage thrust assembly, the number following identifies the bore and outside diameter.
Needle Roller And Cage Assembly Bearings can be used in a wide of industries such as lifting equipment, agricultural, pumps, air conditioning units, fans and general engineering applications.
AXK Series Needle roller and cage thrust assemblies are a low profile high load thrust bearing assembly and can be used with either the AS, LS or GS series thrust washers.

AXK3552 Needle roller thrust bearings detail Specifications

Main Dimensions
AXK Bore diameter(dc):35mm
Tolerance of Bore Diameter:0.05mm to 0.21mm
AS Bore diameter(d):35mm
LS Bore diameter(d1):35mm
AXK Outer diameter(Dc):52mm
Tolerance of Outer diameter:-0.44mm to-0.14mm
AS Outer diameter(D):52mm
LS Outer diameter(D1):52mm
AXK Diameter roller(Dw):2mm
AS Diameter roller(B1):1mm
LS Diameter roller(B):3.5mm
a min:0.6mm
Raceway diameter (min.) roller and cage thrust assembly(Eb):39mm
Raceway diameter (max.) roller and cage thrust assembly(Ea):51mm
Dynamic load ratings (Ca):17.8KN
Static load ratings (Coa): 81KN