page_banner

Products

KMT 34 Precision lock nuts with locking pin

Short Description:

Lock nuts are used to locate bearings and other components onto a shaft as well as to facilitate mounting bearings on tapered journals and dismounting bearings from withdrawal sleeves

Precision lock nuts with locking pins,KMT and KMTA series precision lock nuts have three locking pins equally spaced around their circumference that can be tightened with set screws to lock the nut onto the shaft. The end face of each pin is machined to match the shaft thread. The locking screws, when tightened to the recommended torque, provide sufficient friction between the ends of the pins and the unloaded thread flanks to prevent the nut from loosening under normal operating conditions .

KMT lock nuts are available for thread M 10×0.75 to M 200×3 (sizes 0 to 40) and Tr 220×4 to Tr 420×5 (sizes 44 to 84)


Product Detail

Product Tags

KMT 34 Precision lock nuts with locking pin detail Specifications:

Material : 52100 Chrome Steel

Weight : 2.26 Kg

 

Main Dimensions:

Thread (G) : M170X3.0

Diameter side face opposite to bearing (d1) : 192 mm

Outside diameter (d2) : 205 mm

Outside diameter locating side face (d3±0.30) : 192 mm

Inner diameter locating side face (d4±0.30) : 172 mm

Width (B) : 32 mm

Width locating slot (b) : 14 mm

Depth locating slot (h) : 6.0 mm

Set / Locking screw size (A) : M10

L : 3.0 mm

C : 198.5 mm

R1 : 1.0 mm

Sd : 0.06 mm

图片1

  • Previous:
  • Next:

  • Write your message here and send it to us