page_banner

Products

SL045010-PP Double row full complement cylindrical roller bearings

Short Description:

The full complement cylindrical roller bearings, consisting of a solid outer and inner ring. Between this solid outer and inner ring, there are cylindrical rollers that are guided between the ribs of the rings.


Product Detail

Product Tags

These bearings can support very high radial loads thanks to the maximum number of rollers. In addition, the bearings are extremely rigid and particularly suitable for compact constructions.
Full complement cylindrical roller bearings can be single row or double row bearings and are available as floating bearings, fixed bearings and support bearings. SL045010-PP Double row full complement cylindrical roller bearings
The speeds of full complement bearings are distinctly lower than those of cylindrical roller bearings with cage. Double row full complement cylindrical roller bearings can be disassembled and are easily installed or uninstalled. They are suitable for low speeds and only allow angular errors to a limited extent.

Advantage
Higher load ratings than bearings with cage
High radial rigidity
Only suited for low speeds

Dimensions and Tolerances
Double row full complement cylindrical roller bearings with normal tolerance (PN) in accordance to DIN 620-2 (Tolerances for roller bearings) and ISO 492 (Radial bearings - Dimensional and geometrical tolerances).
Standards
The general dimensions of the cylindrical roller bearings are standardised in DIN 616 (Rolling bearings - Dimensions)

SL045010-PP Double row full complement cylindrical roller bearings  detail Specifications

Material:52100 Chrome Steel
Cage material:No cage
Construction:Double Row, full complement
Angle Of Chamfer 30°
Limiting Speed:1800rpm
Weight:0.76 kg

SL045010-PP Double row full complement cylindrical roller bearings

Main Dimensions
Bore diameter(d):50mm
Outer diameter(D): 80mm
Width(B): 40mm
Outer ring Width,(C):39mm
Distance ring grooves (C1):34.2mm(Tolerance:0/+0.2)
Diameter of groove(D1):77.8mm
Width of groove(m):2.7mm
Minimum chamfer dimension(r min.):0.6mm
Chamfer width(t):0.8mm
Mounting dim for snap ring WRE(Ca1):30mm(Tolerance:0/-0.2)
Mounting dim for retaining ring to DIN 471 (Ca2):29mm(Tolerance:0/-0.2)
Static load ratings(Cor):151KN
Dynamic load ratings(Cr): 102KN
Snap ring WRE:WRE80
Retaining ring to DIN 471:80X2.5


  • Previous:
  • Next:

  • Write your message here and send it to us