page_banner

Products

SUC211-32 Stainless steel insert ball bearing with 2 inch bore

Short Description:

Stainless steel inserts bearing are manufactured from high-grade stainless steel and go inside of a housing. Insert bearings themselves are based on sealed deep groove ball bearings typically within the 62 and 63 series but with a convex outer ring and some sort of shaft-locking mechanism.


Product Detail

Product Tags

The stainless steel bearing inserts are several types which include: flat backed design with a grub screw fixings – SS-SB2.. series, flat back design with a collar SS-SA2.. series, SS-UC2.. standard insert series, SS-UCX.. heavy duty insert series. For non housed designs, we also keep the SS-RB2.. series of inserts with a parallel outer and grub screw locking.

This SUC211-32 stainless steel insert bearing is manufactured to C3 bearing precision standards and is made for a 2" diameter shaft. Our stainless steel insert bearings are found in a broad range of food grade and corrosive applications . It features two 420-grade stainless steel 3/8-24 set screws for locking onto the shaft and is made from high-quality stainless steel grades. The rings and balls are made of 440C stainless, and the flinger and ball retainers are made of 302 stainless steel. This specific combination of stainless steels means that this bearing is food-grade and will have an optimal service life within the application. This SUC211-32 stainless steel bearing also features premium food-grade silicone rubber seals for keeping the lubricant in while keeping contaminants out.

SUC211-32 Stainless steel insert ball bearing detail Specifications

Construction:spherical outer diameter with locking pin,
fixing by socket set screw, seal with slinger,
Material :Stainless Steel
Weight: 1.17KG

SUC211-32 Stainless steel insert bearing

Main Dimensions
Shaft Diameter (d) : 2 inch
Outer diameter (D):100mm
Width (B): 55.6mm
Width of outer ring (C): 25mm
Distance raceway (S): 22.2mm
S1:33.4mm
Distance to set screw (G) : 10mm
Distance center of OR to center of lubrication zone (F) : 7mm
Set screw size (ds) : 3/8-24UNF
Dynamic load ratings (Cr):43.5KN
Static load ratings (Cor):29.2KN


  • Previous:
  • Next:

  • Write your message here and send it to us