UC206 insert bearings with 30mm Bore
Insert bearings with an inner ring that is extended on both sides run more smoothly, as the extent to which the inner ring can tilt on the shaft is reduced.
UC206 Insert bearings with set screws.
are suitable for applications for both constant and alternating directions of rotation.
are locked onto the shaft by tightening the two cup point hexagonal set (grub) screws in the inner ring (positioned 62° apart for bearings of the UC series).
The Features of UC206 insert bearings
1.Quick and easy to mount
The different locking methods enable quick and easy mounting of insert bearings onto the shaft.
2.Accommodate initial misalignment
The spherically shaped outside surface enables initial misalignment by tilting in the housing
3.Long service life
The different sealing solutions available provide a long service life for a wide variety of applications with high contamination levels.
4.Reduced noise and vibration levels
Where high requirements on noise and vibration levels are important, SKF can provide the appropriate shaft locking method.
UC206 insert bearings detail Specifications
Material:52100 Chrome Steel
Construction:Double Seals, Single Row
Bearing type:ball bearing
Bearing No. :UC206
Weight:0.31 kg
Main Dimensions
Shaft Diameter d: 30mm
Outer diameter(D): 62mm
Width(B): 38.1mm
Width of outer ring(C): 19mm
Distance raceway(S):15.9mm
S1:22.2mm
Distance to lubrication hole(G):5 mm
ds: M6X0.75
Dynamic Load Rating :19.50KN
Basic Static Load Ratng :11.3KG
